Struct JournalInner

pub struct JournalInner<ENTRY> {
    pub state: HashMap<Address, Account, RandomState>,
    pub transient_storage: HashMap<(Address, Uint<256, 4>), Uint<256, 4>, RandomState>,
    pub logs: Vec<Log>,
    pub depth: usize,
    pub journal: Vec<ENTRY>,
    pub spec: SpecId,
    pub warm_preloaded_addresses: HashSet<Address, RandomState>,
    pub precompiles: HashSet<Address, RandomState>,
}

Inner journal state that contains journal and state changes.

Spec Id is a essential information for the Journal.

Fields

state: HashMap<Address, Account, RandomState>

The current state

transient_storage: HashMap<(Address, Uint<256, 4>), Uint<256, 4>, RandomState>

Transient storage that is discarded after every transaction.

See EIP-1153.

logs: Vec<Log>

Emitted logs

depth: usize

The current call stack depth

journal: Vec<ENTRY>

The journal of state changes, one for each call

spec: SpecId

The spec ID for the EVM. Spec is required for some journal entries and needs to be set for JournalInner to be functional.

If spec is set it assumed that precompile addresses are set as well for this particular spec.

This spec is used for two things:

• EIP-161: Prior to this EIP, Ethereum had separate definitions for empty and non-existing accounts.
• EIP-6780: SELFDESTRUCT only in same transaction

warm_preloaded_addresses: HashSet<Address, RandomState>

Warm loaded addresses are used to check if loaded address should be considered cold or warm loaded when the account is first accessed.

Note that this not include newly loaded accounts, account and storage is considered warm if it is found in the State.

precompiles: HashSet<Address, RandomState>

Precompile addresses

Implementations

impl<ENTRY> JournalInner<ENTRY>

where ENTRY: JournalEntryTr,

pub fn cload<DB>( &mut self, db: &mut DB, address: Address, key: Uint<256, 4>, ) -> Result<StateLoad<Uint<256, 4>>, <DB as Database>::Error>

where DB: Database,

Loads the private storage value from Journal state.

pub fn cstore<DB>( &mut self, db: &mut DB, address: Address, key: Uint<256, 4>, value: Uint<256, 4>, ) -> Result<StateLoad<SStoreResult>, <DB as Database>::Error>

where DB: Database,

Stores the private storage value in Journal state.

pub fn new() -> JournalInner<ENTRY>

Creates new JournalInner.

warm_preloaded_addresses is used to determine if address is considered warm loaded. In ordinary case this is precompile or beneficiary.

pub fn clear_and_take_output(&mut self) -> JournalOutput

Take the JournalOutput and clears the journal by resetting it to initial state.

Note: Precompile addresses and spec are preserved and initial state of warm_preloaded_addresses will contain precompiles addresses. Precompile addresses

pub fn state(&mut self) -> &mut HashMap<Address, Account, RandomState>

Return reference to state.

pub fn set_spec_id(&mut self, spec: SpecId)

Sets SpecId.

pub fn touch(&mut self, address: Address)

Mark account as touched as only touched accounts will be added to state. This is especially important for state clear where touched empty accounts needs to be removed from state.

pub fn account(&self, address: Address) -> &Account

Returns the loaded Account for the given address.

This assumes that the account has already been loaded.

Panics

Panics if the account has not been loaded and is missing from the state set.

pub fn set_code_with_hash( &mut self, address: Address, code: Bytecode, hash: FixedBytes<32>, )

Set code and its hash to the account.

Note: Assume account is warm and that hash is calculated from code.

pub fn set_code(&mut self, address: Address, code: Bytecode)

Use it only if you know that acc is warm.

Assume account is warm.

In case of EIP-7702 code with zero address, the bytecode will be erased.

pub fn inc_nonce(&mut self, address: Address) -> Option<u64>

Increments the nonce of the account.

Returns

Returns the new nonce if it did not overflow, otherwise returns None.

pub fn transfer<DB>( &mut self, db: &mut DB, from: Address, to: Address, balance: Uint<256, 4>, ) -> Result<Option<TransferError>, <DB as Database>::Error>

where DB: Database,

Transfers balance from two accounts. Returns error if sender balance is not enough.

pub fn create_account_checkpoint( &mut self, caller: Address, target_address: Address, balance: Uint<256, 4>, spec_id: SpecId, ) -> Result<JournalCheckpoint, TransferError>

Creates account or returns false if collision is detected.

There are few steps done:

1. Make created account warm loaded (AccessList) and this should be done before subroutine checkpoint is created.
2. Check if there is collision of newly created account with existing one.
3. Mark created account as created.
4. Add fund to created account
5. Increment nonce of created account if SpuriousDragon is active
6. Decrease balance of caller account.

Panics

Panics if the caller is not loaded inside the EVM state. This should have been done inside create_inner.

pub fn checkpoint(&mut self) -> JournalCheckpoint

Makes a checkpoint that in case of Revert can bring back state to this point.

pub fn checkpoint_commit(&mut self)

Commits the checkpoint.

pub fn checkpoint_revert(&mut self, checkpoint: JournalCheckpoint)

Reverts all changes to state until given checkpoint.

pub fn selfdestruct<DB>( &mut self, db: &mut DB, address: Address, target: Address, ) -> Result<StateLoad<SelfDestructResult>, <DB as Database>::Error>

where DB: Database,

Performs selfdestruct action. Transfers balance from address to target. Check if target exist/is_cold

Note: Balance will be lost if address and target are the same BUT when current spec enables Cancun, this happens only when the account associated to address is created in the same tx

References:

• https://github.com/ethereum/go-ethereum/blob/141cd425310b503c5678e674a8c3872cf46b7086/core/vm/instructions.go#L832-L833
• https://github.com/ethereum/go-ethereum/blob/141cd425310b503c5678e674a8c3872cf46b7086/core/state/statedb.go#L449
• https://eips.ethereum.org/EIPS/eip-6780

pub fn initial_account_load<DB>( &mut self, db: &mut DB, address: Address, storage_keys: impl IntoIterator<Item = Uint<256, 4>>, ) -> Result<&mut Account, <DB as Database>::Error>

where DB: Database,

Initial load of account. This load will not be tracked inside journal

pub fn load_account<DB>( &mut self, db: &mut DB, address: Address, ) -> Result<StateLoad<&mut Account>, <DB as Database>::Error>

where DB: Database,

Loads account into memory. return if it is cold or warm accessed

pub fn load_account_delegated<DB>( &mut self, db: &mut DB, address: Address, ) -> Result<StateLoad<AccountLoad>, <DB as Database>::Error>

where DB: Database,

Loads account into memory. If account is EIP-7702 type it will additionally load delegated account.

It will mark both this and delegated account as warm loaded.

Returns information about the account (If it is empty or cold loaded) and if present the information about the delegated account (If it is cold loaded).

pub fn load_code<DB>( &mut self, db: &mut DB, address: Address, ) -> Result<StateLoad<&mut Account>, <DB as Database>::Error>

where DB: Database,

Loads account and its code. If account is already loaded it will load its code.

It will mark account as warm loaded. If not existing Database will be queried for data.

In case of EIP-7702 delegated account will not be loaded, Self::load_account_delegated should be used instead.

pub fn load_account_optional<DB>( &mut self, db: &mut DB, address: Address, load_code: bool, ) -> Result<StateLoad<&mut Account>, <DB as Database>::Error>

where DB: Database,

Loads account. If account is already loaded it will be marked as warm.

pub fn sload<DB>( &mut self, db: &mut DB, address: Address, key: Uint<256, 4>, ) -> Result<StateLoad<Uint<256, 4>>, <DB as Database>::Error>

where DB: Database,

Loads storage slot.

Panics

Panics if the account is not present in the state.

pub fn sstore<DB>( &mut self, db: &mut DB, address: Address, key: Uint<256, 4>, value: Uint<256, 4>, ) -> Result<StateLoad<SStoreResult>, <DB as Database>::Error>

where DB: Database,

Stores public storage value

pub fn store<DB>( &mut self, db: &mut DB, address: Address, key: Uint<256, 4>, new: Uint<256, 4>, is_private: bool, ) -> Result<StateLoad<SStoreResult>, <DB as Database>::Error>

where DB: Database,

Stores storage slot.

And returns (original,present,new) slot value.

Note: Account should already be present in our state.

pub fn tload(&mut self, address: Address, key: Uint<256, 4>) -> Uint<256, 4>

Read transient storage tied to the account.

EIP-1153: Transient storage opcodes

pub fn tstore(&mut self, address: Address, key: Uint<256, 4>, new: Uint<256, 4>)

Store transient storage tied to the account.

If values is different add entry to the journal so that old state can be reverted if that action is needed.

EIP-1153: Transient storage opcodes

pub fn log(&mut self, log: Log)

Pushes log into subroutine.

Trait Implementations

impl<ENTRY> Clone for JournalInner<ENTRY>

where ENTRY: Clone,

fn clone(&self) -> JournalInner<ENTRY>

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<ENTRY> Debug for JournalInner<ENTRY>

where ENTRY: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<ENTRY> Default for JournalInner<ENTRY>

where ENTRY: JournalEntryTr,

fn default() -> JournalInner<ENTRY>

Returns the “default value” for a type.

impl<'de, ENTRY> Deserialize<'de> for JournalInner<ENTRY>

where ENTRY: Deserialize<'de>,

fn deserialize<__D>( __deserializer: __D, ) -> Result<JournalInner<ENTRY>, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl<ENTRY> PartialEq for JournalInner<ENTRY>

where ENTRY: PartialEq,

fn eq(&self, other: &JournalInner<ENTRY>) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<ENTRY> Serialize for JournalInner<ENTRY>

where ENTRY: Serialize,

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl<ENTRY> Eq for JournalInner<ENTRY>

where ENTRY: Eq,

impl<ENTRY> StructuralPartialEq for JournalInner<ENTRY>

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 224 bytes